| |
| |
| Home > System > Power Plant Reserch > SERT series |
|
Power Plant Reserch |
 Power Plant Research - SERT series |
|
| Slow Extension Rate Test Series is an equipment measures the characteristics of material tension when corrosion under high temperature and high pressure. The mechanism of stress corrosion cracking appears Active path dissolution, Hydrogen embrittlement and film-induced cleavage.
SERT (Slow Extension Rate Test) is used to measure the characteristic of extension when corrosion in high pressure and high temperature. The load is varied to maintain the constant extension rate. While extended, the material is exposed to an environment (temperature, specific fluid, etc.). The method evaluates the corrosion behavior of the material in the given environment, often the environmental effects on the material fracture or stress-corrosion cracking susceptibility.
|
|
| |
|
| |
 Purpose of Tensile Test |
Tensile testing is a fundamental materials science test in which a sample is subjected to a controlled tension until failure. The results from the test are commonly used to select a material for an application, for quality control, and to predict how a material will react under other types of forces. Properties that are directly measured via a tensile test are ultimate tensile strength, maximum elongation and reduction in area. From these measurements the following properties can also be determined: Young's modulus, Poisson's ratio, yield strength, and strain-hardening characteristics
* Stress
Significant stress may exist even when deformation is negligible (a common assumption when modeling the flow of water) or non-existent. Stress may exist in the absence of external forces; such built-in stress is important, for example, in prestressed concrete and tempered glass. Stress may also be imposed on a material without the application of net forces.
* Strain
Strain also means deformation that in continuum mechanics is the transformation of a body from a reference configuration to a current configuration. The picture is about gage length change when pressurized, we can calculate the engineering strain. where ΔL is the change in gauge length, L0 is the initial gauge length.
* Stress & Engineering Strain
* Tensile testing of Steel
A tensile specimen is a standardized sample cross-section. It has two shoulders and a gauge (section) in between. The shoulders are large so they can be readily gripped, whereas the gauge section has a smaller cross-section so that the deformation and failure can occur in this area
* Tensile testing of Steel
A tensile specimen is a standardized sample cross-section. It has two shoulders and a gauge (section) in between. The shoulders are large so they can be readily gripped, whereas the gauge section has a smaller cross-section so that the deformation and failure can occur in this area
|
| |
| SSET Series Features |
| Safety |
• Design according to ASME U1, U2
• Certified by KGS, KOSHA
• Multi-secure safety and step-by-step pressure measurement |
| Convenience |
• Optimum size to fit various places
• Whole control system
• Easy to assemble and disassemble |
| Control system |
• Touch screen
• Precise experimental |
|
| |
| Process Variable of SERT |
| Temperature Uniformity |
| • Supply uniform mixture and install reactor heater making temperature deviation minimum |
| Accuracy of pressure |
| • Auto control valve makes deviation in 1.5%(Max) |
| Accuracy of specimen measurement |
| • Accuracy measurement through Reference electrode, Conax |
|
| |
| Specification |
| * SERT 2A Series |
| Series |
Working Vessel
Volume |
Working Load |
Temperature |
Pressure |
| SERT-2-10K-350 |
2ℓ
|
1,000
㎏ |
350 ℃
|
300 ㎏/㎠ |
| SERT-2-20K-350 |
2ℓ |
2,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
| SERT-2-50K-350 |
2ℓ |
5,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
| SERT-2-100K-350 |
2ℓ |
10,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
|
| |
| * SERT 2B Series |
| Series |
Working Vessel
Volume |
Working Load |
Temperature |
Pressure |
| SERT-2-10K-650 |
2ℓ |
1,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
| SERT-2-20K-650 |
2ℓ |
2,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
| SERT-2-50K-650 |
2ℓ |
5,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
| SERT-2-100K-650 |
2ℓ |
10,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
|
| |
| * SERT 5A Series |
| Series |
Working Vessel
Volume |
Working Load |
Temperature |
Pressure |
| SERT-5-10K-350 |
5ℓ |
1,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
| SERT-5-20K-350 |
5ℓ |
2,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
| SERT-5-50K-350 |
5ℓ |
5,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
| SERT-5-100K-350 |
5ℓ |
10,000
㎏ |
350 ℃ |
300 ㎏/㎠ |
|
| |
| * SERT 5B Series |
| Series |
Working Vessel
Volume |
Working Load |
Temperature |
Pressure |
| SERT-5-10K-650 |
5ℓ |
1,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
| SERT-5-20K-650 |
5ℓ |
2,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
| SERT-5-50K-650 |
5ℓ |
5,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
| SERT-5-100K-650 |
5ℓ |
10,000
㎏ |
650 ℃ |
300 ㎏/㎠ |
|
| |
* Certified by KGS, KOSHA according to pressure vessel regulation
* Besides SUS304 / 316, HC-276, Nickel 200, Inconel 625 can also be used.
* Digital servo motor / stepping motor control device can be selected. |
| |
| ※ Please contact our sales team to inquire about other specification |
| |
Technical sales team : +82-42-931-6100 (Ext. 1) |
|
|
| |
|
| |
|
